Driver's window drama!
#1
Driver's window drama!
Hi all,
Hope somebody can shed some light on this as I'm starting to think I'm losing my mind!
Driver's (O/S) window (only) doesn't work. I can operate all other windows with the driver's switch. Replaced the switch, motor and electrical control module which is attached to the motor. Wiring all looks to be fine. Still nothing, no power getting to motor. What the hell else could it be? Only odd thing i noticed is when i pulled the old switch apart there was a very slight blackening of the contacts on the switch for the window in question. not completely blown by any means.
If you can solve my problem I'll send you a free window motor LOL! Looking forward for some answers!
Cheers
Hope somebody can shed some light on this as I'm starting to think I'm losing my mind!
Driver's (O/S) window (only) doesn't work. I can operate all other windows with the driver's switch. Replaced the switch, motor and electrical control module which is attached to the motor. Wiring all looks to be fine. Still nothing, no power getting to motor. What the hell else could it be? Only odd thing i noticed is when i pulled the old switch apart there was a very slight blackening of the contacts on the switch for the window in question. not completely blown by any means.
If you can solve my problem I'll send you a free window motor LOL! Looking forward for some answers!
Cheers
#2
I would work my way back until I found power i.e. start at the motor then each unit in turn until I found power - could be an wiring issue especially around the blackend contacts, I know a favourite place for failure is where all wires enter the door itself - near the hinges...
Thread
Thread Starter
Forum
Replies
Last Post