i have a 2006 audi a4 2.0T FWD. i changed all 4 motor mounts and now i have a bad vibration througout the car. i press the gas and it takes a minute for it to get going and the acceleration is completely gone. it takes about 20 seconds to get up to 80 now when before it was much quicker. im thinking the clutch is going out because of loss of power, the new mounts (upgraded performance mounts) are making everything secure so im guessing the old mounts gave a little less resistance that it didnt affect the problem as much, as to where now everything is secure and tight so im beginning to notice the actual problem. when idling it vibrates the worst and when i get going to starts to fade away after 2k rpm