Hi all.

I recently picked up a 2001 Audi A6 that needed a motor. I picked up a used BEL and installed it. Ran great, but the clutch wouldn't disengage. I bled the system and still no good. Pulled the motor out to make sure that the actuator arm was in the correct position and replaced the slave cylinder as it appeared to be having issues. The clutch still will not disengage. The pedal won't come all the way up. It feels like it is just starting to make contact with the pressure plate when the pedal gets to the floor.

Anybody have any experience with this? Am I dealing with a situation that the BEL is just not compatible? I have Googled the bejeezus out of this and haven't found anything.

Greatly appreciate any assistance you can provide.