I have a 2006 A3 2.0T non Quattro and I have to replace the driver side front CV axle. I was hoping someone with a Bentley's would be able to provide the torque specs for the axle bolt, the 6 triple square drive bolts that hold hold the axle to the transmission and the 3 bolts on the lower control arm. My idea was to unbolt the axle and then the lower control arm and swing the whole rotor and hub assembly out of the way to replace the axle. Any help would be greatly appreciated, this is my first Audi and we just boght the car 3 weeks ago. I noticed it had a torn CV boot and with not knowing how long its been torn, I decided to just put a new axle in it. Thanks for your time and help.