S Car Model Line Audi S4, Audi S6, and Audi S8..Audi's track-ready touch on each of the popular sedans

going to drag strip..any guesses??

Old Apr 3, 2009 | 06:11 PM
  #1  
bigern45's Avatar
Thread Starter
|
2nd Gear
Joined: Sep 2008
Posts: 1,111
From: kentucky
Default going to drag strip..any guesses??

ok.. finally i get to go to the drag strip in clay city.. its gonna be about 40-45 degrees(yeaaa says the turbos). im running an APR chip, a few runs at 93 octane pump gas and then some with race fuel... i have piggies, and the darintake mod as well. and syncros between 1st and 2nd are ruff, so i have to wait a split second longer to engage 2nd.. full interior minus 2 12 inch jbls and full size spare..

so guys, whats your guesstimates?? traps and ets welcome.. ill post times later tonight or tomorrow and ill have a video link in a day or so.. hoping to get some good shots..
 
Old Apr 3, 2009 | 07:06 PM
  #2  
SOCALMX101's Avatar
1st Gear
Joined: Oct 2008
Posts: 18
Default

Go to S4biturbo.com and click on timeslips there are plenty of cars that have the same mods as you. 13.8 @ 97 mph is my guess though.
 
Old Apr 3, 2009 | 11:15 PM
  #3  
bigern45's Avatar
Thread Starter
|
2nd Gear
Joined: Sep 2008
Posts: 1,111
From: kentucky
Default

drove all the way down there and test and tune was cancelled.. dunno why.. i got the number on speed dial now so ill know for sure next time..one poor bastard had to turn around with a huge diesel pulling a covered car trailer ..on the way back did a couple of 6th gear pulls and hit 125 or so.. i can just imagine k04's or rs6's
 
Old Apr 4, 2009 | 05:47 PM
  #4  
bigern45's Avatar
Thread Starter
|
2nd Gear
Joined: Sep 2008
Posts: 1,111
From: kentucky
Default

Originally Posted by SOCALMX101
Go to S4biturbo.com and click on timeslips there are plenty of cars that have the same mods as you. 13.8 @ 97 mph is my guess though.
and i hope i do better than this.. my buddy has a stock 04 wrx and pulled a 13.5 at 104....
 
Old Apr 4, 2009 | 06:55 PM
  #5  
2000_S4_BITT's Avatar
Member
Joined: Nov 2008
Posts: 56
From: Fort Campbell KY / Pittsburgh, PA
Default

Originally Posted by bigern45
.on the way back did a couple of 6th gear pulls and hit 125 or so.. i can just imagine k04's or rs6's


stop imagining and go get them son!!
 
Old Apr 4, 2009 | 09:59 PM
  #6  
bigern45's Avatar
Thread Starter
|
2nd Gear
Joined: Sep 2008
Posts: 1,111
From: kentucky
Default

already purchasing other parts for the project, bipipe and such..will have new turbos and fueling and such in less than a month...
 
Old Apr 5, 2009 | 03:20 AM
  #7  
2000_S4_BITT's Avatar
Member
Joined: Nov 2008
Posts: 56
From: Fort Campbell KY / Pittsburgh, PA
Default

good luck bud... im at the "turbos in and mechanically back together" but waiting for FPR/injectors/homebrewed MAF/tune portion....
 
Old Apr 5, 2009 | 08:45 AM
  #8  
bigern45's Avatar
Thread Starter
|
2nd Gear
Joined: Sep 2008
Posts: 1,111
From: kentucky
Default

awesome.. say.. where is fort campbell? when you get your project done and i get mine done we should do some pulls... or hit clay city .. or better yet in sparta close to the track they are opening a road course like putnam park.. i got some 225/45 r17 kumho victas that im dying to try out on a good course!!
 
Old Apr 5, 2009 | 01:33 PM
  #9  
RoboRabbit's Avatar
Senior Member
Joined: Mar 2008
Posts: 240
From: VA:Nova/Blacksburg
Default

dont have an estimate for ya, but im curious what you end up with. i figure my car would run roughly the same time. bit faster
 
Old Apr 5, 2009 | 06:23 PM
  #10  
Deb38's Avatar
Senior Member
Joined: Oct 2006
Posts: 844
From: Boston, MA
Default

I ran a 13.4 @ 103 with a chip and cat-back.

The synchros and extra weight are gonna kill your times.
 

Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:44 AM.