DTL LED on all times with Vag Com S6/C6
#1
04-11-2014, 06:21 PM
DTL LED on all times with Vag Com S6/C6
Hey Everyone,
Does anyone know of a Vag Com code to enable the front LED's to be on at all times during running?
Currently when the parking lights go on "Dusk" the LED's shut off and DTL Zenon takes over.
This is for a 2008 S6
Greatly apreciate the help!
Does anyone know of a Vag Com code to enable the front LED's to be on at all times during running?
Currently when the parking lights go on "Dusk" the LED's shut off and DTL Zenon takes over.
This is for a 2008 S6
Greatly apreciate the help!
#2
04-09-2015, 12:24 PM
Adjust LED Brightness
This will allow you to change the intensity of the LED's when your headlights are on. By default the LED's are only 8-9% or brightness.
[09 – Cent. Elect.]
[Security Access - 16] (enter security code. One of the default codes is- 20113)
[Adaptation - 10] -> Channel 3
Enter new value for LED brightness i.e. "100" If you want LED's at 100%.
Values bellow 5 turns the LED's off and generates an error code and warning in DIS .
This will allow you to change the intensity of the LED's when your headlights are on. By default the LED's are only 8-9% or brightness.
[09 – Cent. Elect.]
[Security Access - 16] (enter security code. One of the default codes is- 20113)
[Adaptation - 10] -> Channel 3
Enter new value for LED brightness i.e. "100" If you want LED's at 100%.
Values bellow 5 turns the LED's off and generates an error code and warning in DIS .
Thread
Thread Starter
Forum
Replies
Last Post