Calling out arif, or anyone that knows about the 3" atp mafs....
2nd Gear
Joined: Aug 2005
Posts: 1,273
From: 414
RE: Calling out arif, or anyone that knows about the 3" atp mafs....
ORIGINAL: A4 the Quattro
im pretty sure ive seen a 3" MAF housing somewhere else that wasnt billet .. im thinking it was plastic like the OEM one.. but i was probably high or something and didnt really see it.. check around on the performance sites listed in the Audi Links Post stickied at the top of the A4 forum
im pretty sure ive seen a 3" MAF housing somewhere else that wasnt billet .. im thinking it was plastic like the OEM one.. but i was probably high or something and didnt really see it.. check around on the performance sites listed in the Audi Links Post stickied at the top of the A4 forum
3rd Gear
Joined: Apr 2005
Posts: 2,620
From: Istanbul, Turkey
RE: Calling out arif, or anyone that knows about the 3" atp mafs....
$125 is too much!
Send PM to Renn-Art. They took care of me before. also you can find it vwwortex or something. There was a guy was selling 3" hausings for $25.
Send PM to Renn-Art. They took care of me before. also you can find it vwwortex or something. There was a guy was selling 3" hausings for $25.
2nd Gear
Joined: Mar 2006
Posts: 1,154
From:
RE: Calling out arif, or anyone that knows about the 3" atp mafs....
ORIGINAL: quattrosedan
So the 3" atp mafs that arif has is just a stock sensor with a bigger radiused piping? It isn't an actual new sensor? In that case, I will take Jeff's advice and just make one for him.
So the 3" atp mafs that arif has is just a stock sensor with a bigger radiused piping? It isn't an actual new sensor? In that case, I will take Jeff's advice and just make one for him.
the one the original poster posted didnt have a new sensor .. it was just a billet housing... so ya.. just make one
1st Gear
Joined: Feb 2006
Posts: 159
From:
RE: Calling out arif, or anyone that knows about the 3" atp mafs....
ORIGINAL: Jeff
holy **** thats expensive. just go to homedept and get a 3" tube and cut a whole in teh top for the sensor
holy **** thats expensive. just go to homedept and get a 3" tube and cut a whole in teh top for the sensor
3rd Gear
Joined: Nov 2004
Posts: 1,990
From: Perkasie, PA / Potsdam, NY
RE: Calling out arif, or anyone that knows about the 3" atp mafs....
its tough to make one, i tried, btw the vr6 maf housing is 3" od aka 2.75"id which is the same as the atp which is what most software is written for. If he wants a true 3" id thats the s4 one. They both go for about $25 all over vwvortex
Thread Starter
|
2nd Gear
Joined: Jun 2005
Posts: 1,498
From: Neptune Beach, FL
RE: Calling out arif, or anyone that knows about the 3" atp mafs....
Actually I am in the process of making one right now....3" inner diameter pvc pipe, melt/glue another small piece of pvc to it for the sensor to screw into, then cut a hole through both pieces....the only prob is now I have to buy a 4" to 3" hose to connect it the atp intake tube.
Thread
Thread Starter
Forum
Replies
Last Post
