I got a forge spliter and i put it were the old DV goes. But heres the problem. All the other pics i see the spliter is up in the engin bay not down my my radiator down low. I was wonder how every one else set theres up. Pics would be awsome!!

P.S how many clicks are you guys running. I am basicly stock BTW

 

people just moved theirs up for easier access i think.

 

Ya but how do i get it up there? What tubes do i connect too?

 

different engine's had the dv in slightly different places.

 

K i was just wondering were other people mounted it. Any one got pics were they put ther?

 

https://www.audiforums.com/m_732016/tm.htm

it would be the same as the DV.

if you want more detailed pics, i could take some later from underneath the car

 

Ya i see that how you get the turbo out tube but what about turbo in its not long enogh to reach up there.

 

you mean the tube coming from the bottom of the DV? there's should be a tube going to the bottom of the dv from the front of the turbo, and then a tube coming out the side rerouting the air into the intercooler piping.

how did your tube reach when you had the stock dv if it wont reach now?

 

here's some ms paint work to help illustrate the point

the original made by redgoat which shows a way to mount a BOV


i modified his drawing to show another way to mount a BOV (same way you would mount a DV) on an AEB engine, the hose coming up from the intercooler piping is in some retaining hangars (which is why it is winding)


and here's one i made for you, which should be how later B5's are set up. you use the same hoses that went to your original dv