she's finally clean....
i finally got her to the detail center, here's some pics of my car (i went through with removing the rings from the rear...sorry guys)

i love that my reflectors still work perfectly after all that tinting..


i love that my reflectors still work perfectly after all that tinting..

btw, this isn't just for show-and-tell, i'm lookin for some input on what you guys think, suggestions, all that crap. eventually i'm gonna paint the center rings black and put them back on, and get some one-piece e-codes (possibly paint the housing black, don't know yet). and i'm trying to find a sport suspension to swap my stock out with. how much lower do the sport suspension a4s sit then the standard?
i have the 16" wheels and the sport steering wheel, but i'm pretty sure i don't have the sport suspension, can anyone tell from these pics whether i do or not?
i have the 16" wheels and the sport steering wheel, but i'm pretty sure i don't have the sport suspension, can anyone tell from these pics whether i do or not?
I'd skip the sport suspension and go with something a little lower, then I'd do some simple clean wheels. Also try spraying your tails with a clear coat, it will get rid of the flatness
tom, i think i'm gonna stick with the stock wheels, i like basic 5-spokes and i like a taller wall than most people. thanks for the input though. any suggestions on a good suspension? my main concern is keeping the ride comfortable, that's why i was thinking sport, since it's less drastic. and coilovers are too much for my budget right now. as far as the tails go, i wet sanded those bad boys forever and put about 6-7 coats of clear coat on, if not more, i don't know what happened.
Hmm, I got s4 ultra h&r c/o but the ride is a little stiff, I would probably go with a good strut spring combo, although I don't have experience with any I'm sure some other ppl will tune in. As far as the tails, I tinted my jetta ones and tried several different clear coats, I can;t remeber which company it was but one turned out really nice and shiny..possibly dupli-color? You just hafta try a couple companies but I know I had the same problem and I tried a different company it it turned out great looking.
thanks for the tip tom, i'll try some dupli-color and see how that works out. the funny thing is that i used an "ultra-gloss" clear coat and wet sanded that bitch for daays, and it still turned out like that
i think u should just went with the blacked out corners instead of tinting them. i dont think it looks good at all. sorry. if u get the ecodes you can get them in a black housing just to let ya know


