bought the turboxs hpbc and they were geat... shipped fast and everything...

install was more straight forward than i though and i am very satisfied...

i would suggest this to anyone with ~150 bucks and 15 minutes of time to spare

 

is this a bleed valve or ball and spring . or both.

do you have a dyi for the connection . i dont know what vaccum lines to connect as i have an ebay mbc like so from my old golf turbo

http://cgi.ebay.com/ebaymotors/Hallm...spagenameZWDVW

 

look at cincy's pics.

 

Yea i just got this one too for christmas and finally, i bought an mbc that WORKS!

 

The hpbc is a combo valve with both. No diy needed, the directions are really strait forward. As for pics, just click on my gallery and there is a couple install pics for it. As for the Hallman you have. I hope you have thestainless ball and not the ceramic. The ball & spring mbc reacts fast already and the lighter ball will be brutal on a tiny turbo. You best option is to install the mbc after the n75 with the bottom line going to the n75 and side to the wastegate. This will let the n75 control the boost till ecu set level and the mbc will control everything after that. You can try to install it by itself, but it might be a little jerky.

 

http://cgi.ebay.com/ebaymotors/Turbo...spagenameZWD1V

only 114.85 shipped...hell i might just pick one up.

 

you will love it

 

I bought the last one that was $107 shipped off ebay the other day!!

 

Oh the trends i start

 

doesit take that place of the n75 or just hook up to it