So the windows move up and down a little everytime you open and close your door. Well they tell you not to put your windows down after getting them tinted, so is there any tricks to disable this feature for a week or at least while they are tinting?

 

No need, I never had any problems with it.

 

Disabling it might have a worse affect than leaving it alone...

I'm pretty sure it goes down to clear the weather stripping.

If you disable it you won't have a good seal, your window will flex each time you open and close the door, and it will drag against the weather stripping. I'd just leave it, I don't remember seeingany posts about tint getting screwed up by it.

 

Better yet, buy this:
http://www.auto-locator.com/detail.epc?bcn=WS011707

The windows are already tinted...

 

wonder how you came across this, anything you wanna share? you looking for an advenger?

If this guy spent less on crap, he have an engine and working car

 

I "heard" the guy who owns it got it that way from an ex who owed him $$$ and wasn't able to repay it. Now he has too many othermoney pits(Datsun 240Z, Audi TT) to bother fixing it.

That's just what i heard...

 

hope your "friend" wasnt owed more than $1k

 

dont worry about it... i did but it doesnt matter... just dont roll them down all the way

 

Thank you guys, i'll let the tinter know he doesn't need to do anything special.

 

You haven't had them tinted yet? Are you asking if he needs to re raise the windows while he tints? If so, then yes he will want to manuallyflick the latches to reraise the windows before he tints. If he doesn't you will end up with a 1/2" or so gap at the bottom of your windows. Once he is done you reset the doors so you can open and close normally.

If you were just asking what you need to do after he tints, then nothing. The little the move up and down while opening and closing the doors shouldn't hurt.