B5 Models Please discuss all 1996 - 2001 B5 A4 topics here...

Low speed hesitation/surge

Thread Tools
 
Search this Thread
 
Old Oct 14, 2010 | 04:55 PM
  #1  
Msnickbroderick's Avatar
Thread Starter
|
Actual WIZARD
Joined: Jan 2010
Posts: 1,047
From: Dallas, Texas
Default Low speed hesitation/surge

So I hop in the car this morning, fire it up, and as usual scare everyone with my cat back straight pipe Car starts kinda rough, but I attested it to not holding the key at start long enough. However, after that things start to get weird.

Instead of it holding about 1200rpm like it usually does on a cold start, it misses a bit and hunts between a grand and 1200. Brush it off and start going up the street slowly like normal. However the car decides it doesnt want to play nice today, and starts hesitating/bogging, then would surge a bit. It repeats this as I go along (about 10mph) and once I get into the gas a bit more for a hill, it clears right up and haven't had an issue since. No codes, no lights
 
Old Oct 14, 2010 | 05:52 PM
  #2  
Dozanti's Avatar
1st Gear
Joined: Sep 2010
Posts: 327
From: Ravenna Ohio
Default

Same issue here, I'd like to see some opinions on this one for sure
 
Old Oct 14, 2010 | 11:29 PM
  #3  
Msnickbroderick's Avatar
Thread Starter
|
Actual WIZARD
Joined: Jan 2010
Posts: 1,047
From: Dallas, Texas
Default

Tomorrow morning, I'm gonna crank it MAFless and see if it changes, because this makes me wonder..

http://www.youtube.com/watch?v=VTG5tOGNh7o
 
Old Oct 15, 2010 | 09:35 PM
  #4  
MiamiA4guy's Avatar
1st Gear
Joined: Jul 2010
Posts: 466
From: Miami, FL
Default

TPS sensor just guessing BTW
 
Old Oct 15, 2010 | 10:23 PM
  #5  
skipismydog's Avatar
1st Gear
Joined: Oct 2010
Posts: 4
Default

A4 2.8 quattro i got codes p1129 p1127 p1141 i replaced the purge valve now i get these codes.this all happened after i got exhaust welded does anybody know what they are
 
Old Oct 15, 2010 | 10:27 PM
  #6  
skipismydog's Avatar
1st Gear
Joined: Oct 2010
Posts: 4
Default

I know it has to do with fuel too lean but where do you start
 
Old Oct 16, 2010 | 12:29 AM
  #7  
colony777's Avatar
1st Gear
Joined: Aug 2010
Posts: 210
From: york, PA
Default

did you recently unplug your throttle body? that could cause that. umm.... misfires? bad o2 sensors. fuel filter? clogged injector? boost leak? just throwing out some options
 
Old Oct 16, 2010 | 08:51 AM
  #8  
skipismydog's Avatar
1st Gear
Joined: Oct 2010
Posts: 4
Default

I
Originally Posted by colony777
did you recently unplug your throttle body? That could cause that. Umm.... Misfires? Bad o2 sensors. Fuel filter? Clogged injector? Boost leak? Just throwing out some options
i did not do anything i replaced purge valve because the code came up.that is fine i was driving it last night and when i was shifting into 3rd gear it lost power and the light came on. It must be some air problem.
 
Old Oct 16, 2010 | 08:56 AM
  #9  
skipismydog's Avatar
1st Gear
Joined: Oct 2010
Posts: 4
Default

I think the p1141 is the maf sensor i am going to check it today and also look for leaks.if anybody has any other ideas please let me know thanks
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tomo5011
Audi A6
0
Aug 6, 2012 09:29 AM
ianjm
General Tech
0
Feb 24, 2010 06:51 PM
TomoChubachi
B6 Models
1
Jul 3, 2008 12:38 AM
nick17
B5 Models
3
Feb 19, 2008 10:23 PM
scottlt79
Audi A4
6
Dec 31, 2007 11:38 AM




All times are GMT -4. The time now is 04:20 AM.