need help with injector problems

Reply Subscribe

Thread Tools

Search this Thread

Nov 3, 2010 | 05:40 PM

#11

Mike-2ptzero

4th Gear

Joined: Apr 2008

Posts: 3,274

From: Phoenix, Arizona area

Its actualy not that hard. There are even DIY write ups on how to do it and what parts are needed.

Nov 3, 2010 | 05:57 PM

#12

kyle a4

Thread Starter

1st Gear

Joined: Jun 2010

Posts: 26

im located in colorado and i was thinking about doing a 5 speed swap but there is alot that goes into it and i can't find anywhere where someone has done it or a gurrante it will bolt up

Nov 3, 2010 | 06:09 PM

#13

Mike-2ptzero

4th Gear

Joined: Apr 2008

Posts: 3,274

From: Phoenix, Arizona area

One of my customers did it on his 2001 A4 1.8t. The main thing is that the crank flange just has to be grinded down to allow the flywheel to bolt onto it.

his write up of that swap

Nov 3, 2010 | 06:18 PM

#14

turbo kraut

Tech Guru

Joined: Nov 2006

Posts: 5,868

From: Des Peres, Mo

Quote:

Originally Posted by Mike-2ptzero

One of my customers did it on his 2001 A4 1.8t. The main thing is that the crank flange just has to be grinded down to allow the flywheel to bolt onto it.

his write up of that swap

was just about to point him to his build