Repair manual/specs 1995 2.8 90quattro?
#1
Repair manual/specs 1995 2.8 90quattro?
Wrong forum I know, but you guys are knowledgeable, and might be able to help me out. I also posted in the classic section without much activity. Anyways.
I'm replacing the headgaskets on my friends 1995 Audi 90, it has the 2.8 v6. I need to know what the torque specs are for putting it all back together. Is it pretty much the same as the 2.8 (12v) in the early B5s? Because I have a Hayes manual for the b5 generation. Thanks
-Bryan
I'm replacing the headgaskets on my friends 1995 Audi 90, it has the 2.8 v6. I need to know what the torque specs are for putting it all back together. Is it pretty much the same as the 2.8 (12v) in the early B5s? Because I have a Hayes manual for the b5 generation. Thanks
-Bryan
#2
the engines are very similar but im not sure if the bolt torque is the exact same. i would go to the dealer and buy the bolts and just ask the guy at the counter what to torque them to. or even just call a dealer parts/service center, they should be able to tell you.
Thread
Thread Starter
Forum
Replies
Last Post