General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Audi b6 3.0 won't start, PLEASE HELP

Thread Tools
 
Search this Thread
 
  #1  
Old 12-13-2010, 04:43 PM
3.0audi's Avatar
1st Gear
Thread Starter
Join Date: Nov 2010
Posts: 6
Default Audi b6 3.0 won't start, PLEASE HELP

I bought a 2003 Audi A4 Quattro 3.0 6spd with front end damage. It came without fuses by the drivers door, so i went ahead and installed them. The engine turns over but wont start. The fuel pump is good as well as the spark.
The car had to drive since it got into an accident..

I connected a scanner and it found these codes:

P0201 Injector circuit malfunction - cylinder no. 1
P0202 Injector circuit malfunction - cylinder no. 2
P0203 Injector circuit malfunction - cylinder no. 3
P0204 Injector circuit malfunction - cylinder no. 4
P0205 Injector circuit malfunction - cylinder no. 5
P0206 Injector circuit malfunction - cylinder no. 6

Im not sure where the injectors wiring goes.
Is there a relay for the injector circuit?

Any help would be appreciated.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
zslatcher
Electronics
0
10-24-2011 06:14 AM
mark944turbo
General Tech
1
10-10-2005 05:51 PM



Quick Reply: Audi b6 3.0 won't start, PLEASE HELP



All times are GMT -4. The time now is 07:28 AM.