advice please !
shame there isnt an audi 80/90 forum something the mods should have a look at
and welcome.
Dash panel insert[/align]VDO dash panel insert - exploded view[/align]
Base plate with speedometer
â—†Checking speedometer sensor=> Page 90-37.
â—†Removing and installing => Page 90-50 [/ul]
Front frame with glass
â—†Removing and installing => Page 90-50
â—†Set down carefully onto soft cloth to avoid scratching glass [/ul]
Base plate with rev counter
â—†Checking engine speed signal => Page 90-40
â—†Removing and installing => Page 90-51 [/ul][/ul]
Printed circuit board
â—†Assignment of multi-pin connectors => Page 90-13 onwards
â—†Removing and installing => Page 90-49 [/ul]
Securing bolts
â—†For printed circuit board [/ul]
Washer
Hexagon nut
Controller
â—†For dash panel insert, switch and instrument lighting
â—†Removing and installing => Page 90-71 [/ul][/ul]
Washer
Hexagon nut
Display unit
â—†For mini-check system
â—†Removing and installing => Page 90-72 [/ul]
Display unit
â—†for auto-check system/on-board computer
â—†Removing and installing => Page 90-72 [/ul]
Securing bolts
â—†for mini-check/auto-check system/on-board computer [/ul][/ul]
Dash panel insert[/align]Removing and installing dash panel insert[/align]
‒Removing steering wheel and steering column switch => Page 94-28. [/ul]
‒→ Unscrew recessed-head screws-arrows-.
‒Carefully pull dash panel insert out of instrument panel, placing a soft cloth over the steering column if necessary.
‒Removing plug for multi-pin connectors => Page 90-19
‒Detach all connectors
‒Remove dash panel insert. [/ul]
Dash panel insert[/align]Assignment of lamps in dash panel insert[/align]
‒Removing and installing cap-type lamps => Page 90-71. [/ul]
Dash panel insert illumination
â—†1.2 W (6x) [/ul]
Right turn signal warning lamp
â—†1.2 W [/ul]
Unallocated
Brake warning lamp
â—†1.2 W
â—†Only in vehicles with no auto-check system [/ul][/ul]
Coolant temperature warning lamp (overheating)
â—†1.2 W
â—†Only in vehicles with no auto-check system [/ul]
Oil pressure warning lamp
â—†1.2 W
â—†Only in vehicles with no auto-check system [/ul]
Left turn signal warning lamp
â—†1.2 W [/ul]
Digital clock illumination
â—†1.2 W [/ul]
Charge warning lamp
â—†2 W [/ul][/ul]
Immobiliser warning lamp
â—†1.2 W
â—†Differing assignment
CAT 6-cylinder engine: [/ul]
Diesel choke warning lamp
â—†1.2 W
â—†Differing assignment
CAT [/ul]
Lamp for trailer turn-signal indicator
â—†1.2 W
â—†Retrofitted
â—†Differing assignment
Side lights/airbag/engine electronics [/ul]
Brake/handbrake warning lamp
â—†1.2 W [/ul][/ul]
Seat-belt warning lamp
â—†1.2 W
â—†Differing assignment
Engine electronics/hazard warning/airbag [/ul]
Anti-lock braking system warning lamp
â—†1.2 W [/ul]
Main beam warning lamp
â—†1.2 W [/ul]
Airbag warning lamp
â—†1.2 W
â—†Differing assignment
Engine electronics/seat-belt warning [/ul][/ul]
Dash panel insert[/align]Removing and attaching multi-pin connector plugs[/align]
Removal:
‒→ Use small screwdriver or plastic wedge to lift plug catch upwards -arrow- as far as it will go. [/ul]
Note:
The plug cannot be removed unless the catch has been raised
‒Pull off plug by hand. [/ul]
Installation:
‒Push plug by hand on as far as it will go
‒Slide in the catch [/ul]
you don't need to remove the steering wheel but you need to remove the cowling round it
[IMG]local://upfiles/12092/69818BB67CEF4D9BBC7692A3E700C368.jpg[/IMG]
[IMG]local://upfiles/12092/70C214ECF96C4AB2BA4A30CBB60DED76.jpg[/IMG]
[IMG]local://upfiles/12092/9FE3E50863544117BE2C9ED2D0201D97.jpg[/IMG]
and welcome.Dash panel insert[/align]VDO dash panel insert - exploded view[/align]
Base plate with speedometer
â—†Checking speedometer sensor=> Page 90-37.
â—†Removing and installing => Page 90-50 [/ul]
Front frame with glass
â—†Removing and installing => Page 90-50
â—†Set down carefully onto soft cloth to avoid scratching glass [/ul]
Base plate with rev counter
â—†Checking engine speed signal => Page 90-40
â—†Removing and installing => Page 90-51 [/ul][/ul]
Printed circuit board
â—†Assignment of multi-pin connectors => Page 90-13 onwards
â—†Removing and installing => Page 90-49 [/ul]
Securing bolts
â—†For printed circuit board [/ul]
Washer
Hexagon nut
Controller
â—†For dash panel insert, switch and instrument lighting
â—†Removing and installing => Page 90-71 [/ul][/ul]
Washer
Hexagon nut
Display unit
â—†For mini-check system
â—†Removing and installing => Page 90-72 [/ul]
Display unit
â—†for auto-check system/on-board computer
â—†Removing and installing => Page 90-72 [/ul]
Securing bolts
â—†for mini-check/auto-check system/on-board computer [/ul][/ul]
Dash panel insert[/align]Removing and installing dash panel insert[/align]
‒Removing steering wheel and steering column switch => Page 94-28. [/ul]
‒→ Unscrew recessed-head screws-arrows-.
‒Carefully pull dash panel insert out of instrument panel, placing a soft cloth over the steering column if necessary.
‒Removing plug for multi-pin connectors => Page 90-19
‒Detach all connectors
‒Remove dash panel insert. [/ul]
Dash panel insert[/align]Assignment of lamps in dash panel insert[/align]
‒Removing and installing cap-type lamps => Page 90-71. [/ul]
Dash panel insert illumination
â—†1.2 W (6x) [/ul]
Right turn signal warning lamp
â—†1.2 W [/ul]
Unallocated
Brake warning lamp
â—†1.2 W
â—†Only in vehicles with no auto-check system [/ul][/ul]
Coolant temperature warning lamp (overheating)
â—†1.2 W
â—†Only in vehicles with no auto-check system [/ul]
Oil pressure warning lamp
â—†1.2 W
â—†Only in vehicles with no auto-check system [/ul]
Left turn signal warning lamp
â—†1.2 W [/ul]
Digital clock illumination
â—†1.2 W [/ul]
Charge warning lamp
â—†2 W [/ul][/ul]
Immobiliser warning lamp
â—†1.2 W
â—†Differing assignment
CAT 6-cylinder engine: [/ul]
Diesel choke warning lamp
â—†1.2 W
â—†Differing assignment
CAT [/ul]
Lamp for trailer turn-signal indicator
â—†1.2 W
â—†Retrofitted
â—†Differing assignment
Side lights/airbag/engine electronics [/ul]
Brake/handbrake warning lamp
â—†1.2 W [/ul][/ul]
Seat-belt warning lamp
â—†1.2 W
â—†Differing assignment
Engine electronics/hazard warning/airbag [/ul]
Anti-lock braking system warning lamp
â—†1.2 W [/ul]
Main beam warning lamp
â—†1.2 W [/ul]
Airbag warning lamp
â—†1.2 W
â—†Differing assignment
Engine electronics/seat-belt warning [/ul][/ul]
Dash panel insert[/align]Removing and attaching multi-pin connector plugs[/align]
Removal:
‒→ Use small screwdriver or plastic wedge to lift plug catch upwards -arrow- as far as it will go. [/ul]
Note:
The plug cannot be removed unless the catch has been raised
‒Pull off plug by hand. [/ul]
Installation:
‒Push plug by hand on as far as it will go
‒Slide in the catch [/ul]
you don't need to remove the steering wheel but you need to remove the cowling round it
[IMG]local://upfiles/12092/69818BB67CEF4D9BBC7692A3E700C368.jpg[/IMG]
[IMG]local://upfiles/12092/70C214ECF96C4AB2BA4A30CBB60DED76.jpg[/IMG]
[IMG]local://upfiles/12092/9FE3E50863544117BE2C9ED2D0201D97.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post



, still cant find fusebox[
]
