Okay. i have been wondering about my boost suddenly jumping to 20 ish then instantly dropping to 15 ish. I talked to the guys at 2Bennett Audimotive and they said it is my computer seeing that the boost is too high and telling it to drop, which is normal. (these are 1.1bar chips which is around 16 psi)

I was wondering, could i put in a manual boost controller and allot it to run to full boost?

 

if you put it in your car and set it to say 16/17 psi you would reduce spiking. just be careful you don't set it too high

 

there is only one solution that does it right:

http://www.modshack.info/bm.htm[/b]

 

ummm no..... there is more than one right way to do it, but even better that your thing there is just a different N75 valve

 

but with a different n75 vlve, the computer would still see the spike and make it go byebye. unless im compleetly wrong on how an n75 valve works...

 

bump anyone?

 

yoohoo. i feel lonley here

 

The N75 reduces spiking. I may get a 1 or 2 psi spike with my H valve. I hold 18-20 psi depending on the weather. When I gun it, I usually see maybe 21 psi and then it levels out to 19-20psi.