profec b NEED HELP!
Thread Starter
|
5th Gear
Joined: Aug 2006
Posts: 8,355
From: Orlando, FL
RE: profec b NEED HELP!
yeah its just a connection to make things easier, 1 white and 1 green on both ends of the clip so i can just cut both and solder the wires, right?
there's no way im stripping the tiny wire tho, i can barely get the stripper even in the position to strip it cause of the other wire and its so small
there's no way im stripping the tiny wire tho, i can barely get the stripper even in the position to strip it cause of the other wire and its so small
3rd Gear
Joined: Oct 2007
Posts: 2,097
From:
RE: profec b NEED HELP!
ORIGINAL: cincyTT
try this... http://www.alamomotorsports.com/gred...EC_B_SPEC2.pdf
THe valve unit (bottom left of top pic) shouldnt have a T in it. On line goes where the n75 is and then the wire on the back goes to the controller.
The line with the filter goes from the controller to the fpr buy itself.
Then you just need a ground and 12v source
try this... http://www.alamomotorsports.com/gred...EC_B_SPEC2.pdf
THe valve unit (bottom left of top pic) shouldnt have a T in it. On line goes where the n75 is and then the wire on the back goes to the controller.
The line with the filter goes from the controller to the fpr buy itself.
Then you just need a ground and 12v source
Thread Starter
|
5th Gear
Joined: Aug 2006
Posts: 8,355
From: Orlando, FL
RE: profec b NEED HELP!
ORIGINAL: Bogie
Maybe he had this T here for using the boost gage while also running the PROFEC.
ORIGINAL: cincyTT
try this... http://www.alamomotorsports.com/gred...EC_B_SPEC2.pdf
THe valve unit (bottom left of top pic) shouldnt have a T in it. On line goes where the n75 is and then the wire on the back goes to the controller.
The line with the filter goes from the controller to the fpr buy itself.
Then you just need a ground and 12v source
try this... http://www.alamomotorsports.com/gred...EC_B_SPEC2.pdf
THe valve unit (bottom left of top pic) shouldnt have a T in it. On line goes where the n75 is and then the wire on the back goes to the controller.
The line with the filter goes from the controller to the fpr buy itself.
Then you just need a ground and 12v source
3rd Gear
Joined: Oct 2007
Posts: 2,097
From:
RE: profec b NEED HELP!
Oh, thought he was referring to the T where you have '...FPR?' labeled. That's where I put my T for my boost gage line.
Have fun with that, looks complicated ata first glance. Hopeyou get it working right.
Have fun with that, looks complicated ata first glance. Hopeyou get it working right.
Thread Starter
|
5th Gear
Joined: Aug 2006
Posts: 8,355
From: Orlando, FL
RE: profec b NEED HELP!
yeah it looked complicated at first but when i started thinkin bout everythin, it makes sense. im just gona redo all the wiring how Greddy shows it, screw this kids ghetto install
Thread
Thread Starter
Forum
Replies
Last Post
onesickassfasta4
Archive - Engine/Performance Parts
4
Jun 3, 2008 11:14 AM
Bondga
Archive - Engine/Performance Parts
9
Oct 23, 2007 11:48 PM
