AudiForums.com

Audi A6 The mid-sized Audi A6 model offers more room to the driver and passengers over the A4 line.

Tools need to replace front control arm

Thread Tools
 
Search this Thread
 
Old Feb 13, 2008 | 09:51 AM
Share
  #1  
marcint's Avatar
Thread Starter
|
1st Gear
Joined: Feb 2008
Posts: 7
Default Tools need to replace front control arm
Hi folks,

what tools do i need to replace front control arm (driver side) + brake hoses?

I would go with the kit if possible over buying one by one.
 
Reply
Old Feb 13, 2008 | 05:30 PM
Share
  #2  
CamoA6's Avatar
2nd Gear
Joined: Aug 2006
Posts: 782
From: Wilmington, NC
Default RE: Tools need to replace front control arm
forget the exact mm but you'll want rust bust. Are you doing all four in the front? if so. just take the whole strut out and do it outside the car. I find that much easier.
 
Reply
Old Feb 13, 2008 | 05:58 PM
Share
  #3  
marcint's Avatar
Thread Starter
|
1st Gear
Joined: Feb 2008
Posts: 7
Default RE: Tools need to replace front control arm
only front upper one for now it got loose. ok will try doing that

thx
 
Reply
Old Feb 13, 2008 | 10:40 PM
Share
  #4  
daroshi's Avatar
Senior Member
Joined: Sep 2006
Posts: 171
From: WA
Default RE: Tools need to replace front control arm
Check this very detailed thread... http://www.audiworld.com/tech/wheel43.shtml
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
what tools do i need to replace rotors and brakes
austindgarner
B5 Models
5
Mar 1, 2011 09:16 PM
replacing both front axles, bpass side hub with upper control arm and lower control a
MattP87
Audi A6
4
Mar 22, 2010 09:25 AM
noob looking for tools needed to replace outer cv boot on B5
jonnyblazz1
S Car Model Line
3
May 14, 2008 10:48 PM
EXACTLY WHATS PARTS+TOOLS FOR KO3 REPLACE?
zat0rsk1
Audi A4
9
Jul 31, 2006 03:07 PM
Tools required for a front brake job
T90
General Tech
0
Nov 19, 2005 05:31 AM
Tags
Back to Subforum
Audi A6
View Next Unread
2.7T...smoking from tailpipe.




Advanced Search

All times are GMT -4. The time now is 07:43 AM.