changing a hazard switch
Thread Starter
|
1st Gear
Joined: Oct 2007
Posts: 143
changing a hazard switch
Does any have link or know how to change the hazard switch on a 2000 audi a6? Also, are they a 7 pin or 10 pin? I want to change the switch because my blinkers are not working properly. thanks
Banned
Joined: Mar 2008
Posts: 376
this is simple.. if you carefully pop off that one piece of trim around the cupholder/hazzard button its exposed there.. then take a flat head screw driver and from the top pop it out and then disconnect it and reverse for the new one. get the 10 pin relay.
Senior Member
Joined: Oct 2007
Posts: 244
From:
Yup this is really simple. I had the same problems with my blinkers. Did it two days ago. Took all of 5 minutes. I used http://forums.audiworld.com/allroad/msgs/91515.phtml as a guide. I got the part from http://genuineaudiparts.com/
Senior Member
Joined: Oct 2007
Posts: 244
From:
Oh, and if you want the pics from the above mentioned guide, you can find them using the Wayback Machine http://www.archive.org/web/web.php
Code:
http://mywebpages.comcast.net/ryanjen1/allroad/console_trim.jpg http://mywebpages.comcast.net/ryanjen1/allroad/relay1.JPG http://mywebpages.comcast.net/ryanjen1/allroad/relay2.JPG http://mywebpages.comcast.net/ryanjen1/allroad/relay3.JPG
Last edited by cbock; Dec 4, 2008 at 01:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post
