B5 Models Please discuss all 1996 - 2001 B5 A4 topics here...

PLEASE HELP ME!!!! a4 idling very low when coming to a stop

Old Jan 26, 2014 | 06:38 PM
  #1  
samcrored's Avatar
Thread Starter
|
1st Gear
Joined: Jan 2014
Posts: 4
Default PLEASE HELP ME!!!! a4 idling very low when coming to a stop

98 audi a4 2.8 30v, .....i have a cel for the secondary air pump. but the light comes on and off intermittently. recently i have found when i slow down it idles at around 300-400 for a second and then goes back to 600rpm...i am affraid that it will die on me i have a long drive to work everyday please help!
 
Old Jan 27, 2014 | 06:49 PM
  #2  
markymarc's Avatar
2nd Gear
Joined: Apr 2009
Posts: 675
From: Des Moines, IA
Default

What are the codes? I'm going to advise to clean your throttle body, that will probably clear up the idle issue, unless it's caused by something else, just post all your codes.

Could also be a vacuum leak and/or related to the SAI pump....

And I just thought of it, unplug your MAF sensor while the car is running...if your SAI pump is bad, the MAF is going to suck in 'bad' air and send the wrong signal to the PCM, causing a bad idle.....so, unplug the MAF while it's running, and if it runs better, than your issue is caused by your SAI pump or smog system somewhere.....
 

Last edited by markymarc; Jan 27, 2014 at 07:03 PM.
Old Jan 28, 2014 | 09:02 AM
  #3  
the whale's Avatar
1st Gear
Joined: Jan 2014
Posts: 15
Default

What is a SAI? Every one on these boards is so helpful but they use terms I don't know. Not only am I a noob to Audi but for the most part a noob to DIY's and auto repair.
 
Old Jan 28, 2014 | 09:06 AM
  #4  
markymarc's Avatar
2nd Gear
Joined: Apr 2009
Posts: 675
From: Des Moines, IA
Default

Originally Posted by the whale
What is a SAI? Every one on these boards is so helpful but they use terms I don't know. Not only am I a noob to Audi but for the most part a noob to DIY's and auto repair.
Secondary Air Pump, as mentioned in OPs post.
 
Old Jan 28, 2014 | 10:37 AM
  #5  
samcrored's Avatar
Thread Starter
|
1st Gear
Joined: Jan 2014
Posts: 4
Default

the only code im getting is p0411... sai...something....but anyway i unpluged the maf and nothing happened...but i did try to put it in reverse and it jerked the hell oit of the car and the car wouldnt move
 
Old Jan 28, 2014 | 12:26 PM
  #6  
BaseDrifter's Avatar
Site Moderator/B5 Tech Guru
Joined: Feb 2010
Posts: 1,745
From: Bay Area, CA
Default

Clean out your throttle body.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BigJay3353
B6 Models
5
Aug 18, 2018 06:12 PM
netoLopez
B5 Models
12
Jun 1, 2017 12:34 AM
pjm1026
B7 Models
2
Jan 4, 2014 09:29 PM
Mr. Phil
B5 Models
5
Aug 28, 2009 02:51 PM
MOUNTAINFIRE1
General Tech
0
Dec 19, 2008 12:34 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 05:05 PM.