I ordered a oem replacment from advance autoparts the disk is unsprung i also have a stage 2 unsprung should i use one of these?

 

Oh ya im planing on apr 1+ tune and supporting mods in the next two months

 

unpsrung wont matter much as you have a dual mass flywheel. it is meant to aborb the vibraton instead of the disk itself. feel free to use either, but i would use oem, unless your stage 2 is a brand name like sachs. if its ebay, id pass

 

Sweet

 

Thanks for the info i thought the same i just wanted to be sure im going with the oem the stage two feels very cheap on the friction disk compared to the oem. Thanks for the reply.

 

no problem

 

Not a good idea to throw a different disk in with the stock pressure plate since the disk could be of a different thickness. If it is too thin the PP might not clamp down on it enough and ending up with less clamping load and even a shorter life span. If it is too thick the disk might not release completely causing problems of getting into gear.